Getting Started – RolliBot

31AugAugust 31, 2015

Remote Control

Display Screen Display screen shows the time setting, charging status, and error codes by using numbers, letters, or graphic. Buttons 2. "Home" Auto Charging Press "HOME" button and the RolliBot BL618 will go back to its charging station to automatically charge. Press "HOME" button again or the "On/Off" button and RolliBot BL618 will stop and go into standby mode. 3. "PLAN" Schedule Button Press "PLAN" button to set up scheduled cleaning operation. Click to see schedule cleaning setup. 4. "On/Off" Clean Button A. Press this button twice...

Battery Charging

Battery Charging A. Charging Station Placement Place charging station against the wall and remove obstacles about 1 meter (3.3 ft) at two sides and about 2 meters (6.6 ft) in front of the station, as show in figure below. Charging Station Placement - 6.6 ft clearance in front and 3.3 ft clearance to the sides Two ways to charge your RolliBot: 1. Plug the power adapter directly into the RolliBot. See Figure A below. Plug adapter into directly into RolliBot. 2. Setup charging station and press the...

Adding Mopping Attachment

Adding the Mopping attachment to RolliBot Adding Mopping Attachment to RolliBot Attach wet tissue or micro-fiber cloth to mopping holder Attach mopping holder to the bottom of RolliBot. Make sure to align the bolts and firmly press the mopping attachments into the slots on the bottom of RolliBot. If wet tissue is bigger than mopping holder, please trim wet tissue to mop holder size. Make sure the wet tissue does not rub or cover the robot wheels Be sure to turn off the UV Sterilization...